2026 Honda Power VersAttach™ UMC435LAC1

Information

2026 Honda Power VersAttach™ UMC435LAC1

The Honda VersAttach™ Powerhead makes life easier by connecting to a variety of different lawn and garden landscaping tools.

Features may include:

  • Powered by 35cc Honda GX35 OHC Mini 4-stroke engine.
  • Wide variety of multi-purpose attachments available.
  • Fuel efficient, user-friendly and easy to start.
  • Compact and lightweight ergonomic design.
  • Offers full 360º inclinable operation. Low engine noise and minimal vibration.
  • Low engine noise and minimal vibration.
  • Safe and secure SureLoc™ System – easy to connect.

Photos

Highlights

  • Selkirk, Manitoba
  • 2026
  • Honda Power
  • VersAttach™ UMC435LAC1
  • Model: GX35
  • Recommended Fuel: Regular unleaded gasoline (87 Octane) | Fuel Primer: Anti-flood type
  • (Without Blade): 7 kg (15.4 lbs.)
  • Available

Specifications

  • 2026
  • Honda Power
  • VersAttach™
  • UMC435LAC1
  • General
  • Model: GX35
  • Honda
  • mini 4-stroke, OHC, single cylinder air-cooled multi-position (360°) | Spark Plug: CMR5H (NGK) | Stopping System: Ignition primary circuit ground | Stop Switch: Slide type switch
  • single
  • 35.8 cc (2.18 CID)
  • 39 mm (1.5 in.)
  • 30 mm (1.2 in.)
  • 1.6 N.m (1.20 lbf-ft.) @ 5,500 RPM
  • Idle: 3,100 ± 200 RPM | Max. No-Load RPM* (Requires Blade Barrier): 10,000 RPM
  • Transistorized flywheel magneto (electronic)
  • Forced air
  • Recoil starter
  • Semi-dry type
  • Oil mist
  • Recommended Fuel: Regular unleaded gasoline (87 Octane) | Fuel Primer: Anti-flood type
  • Centrifugal Twin Shoe-Clutch | Size: 78 mm (3.0625 in.) Diameter | Engagement: 4;200 ± 200 RPM
  • Control Type: Two-motion trigger type
  • Flexible steel cable
  • Gear Case: Helical cut bevel gears / Sealed ball bearings
  • 1.235 Input shaft: 1 (Output Shaft)
  • Fuel Consumption (approximate): 0.7 L/hr (0.15 Imp. gal./hr)
  • Cutting Line Diameter: 2.41 mm (0.095 in.) or 2.67 mm (0.105 in.) | Main Pipe Diameter: 25.4 mm (1 in.)
  • With Cutter Mounted: 190.5 cm (75 in.)
  • (handlebars) 60 cm (23.6 in.)
  • 40.5 cm (15.9 in.)
  • 43.2 cm (17 in.)
  • 0.65 L (22.9 fl. Imp. oz.)
  • 100 cc (3.52 fl. Imp. oz.)
  • (Without Blade): 7 kg (15.4 lbs.)
  • Handle Type: U-shaped (bike type handle) | Line Type: Quiet LineTM
  • Diaphragm type w/fuel pump
  • Recommended: SAE 10W30 API service classification SJ or later
  • Manual line feed nylon
  • Main Pipe Thickness / Material: 1.5 mm (0.06 in.) / Aluminum