2024 Honda Marine BF30 SHGC-Type
- Year 2024
- Make Honda Marine
- Model BF30
2024 Honda Marine BF30 SHGC-Type
2024 Honda Marine BF30 SHGC-Type
Honda BF30 Mid-Range Outboard MotorThe Honda BF30 delivers big power and torque thanks to its whopping 552 cc displacement, making it ideal for 14-16 ft. fishing boats, pontoon boats or small runabouts. It has an ultra-smooth 3-cylinder design, remote control for convenience and precision, a Fresh Water Flushport and Power Tilt and Trim.
Features may include:Reliability and Durability
Four-Stroke Engine Design- World-renowned Honda quality, proven reliability with no oil mixing.
- Standard rev-limiter protects the engine from severe damage caused by over-revving.
- Standard over-rev and overheat warning systems offer peace of mind and protect your investment.
- Allows easy hook-up to fresh water supply to flush debris and salt water out of the engine, extending the life of the outboard (optional Flush Kit required).
Convenience and Ease of Use
Emergency Stop Switch/Safety Lanyard- The boat operator clips the lanyard to his or her wrist, which will activate the safety stop switch if the operator leaves the helm.
- A 10-amp charging system is standard on the electric-start model. Each system is equipped with a solid-state regulator/rectifier for easy hook-up.
- A 25-litre fuel tank, fuel hose and aluminum propeller are included as standard equipment.
Engine
Engine Type
4-Stroke SOHC; 3 Cylinders / 6 Valves
Engine Power
Rated: 30 HP @ 6,000 RPM
Displacement
33.7 cubic in. (552 cc)
Throttle
Full Range: 5,000-6,000 RPM
Bore
2.40 in. (61 mm)
Stroke
2.48 in. (63 mm)
Cooling System
Water Cooled
Ignition
System: Capacitor Discharge; Digital CDI
Starter
System: Electric
Exhaust
Through Prop Hub
Lubrication
Forced Lubrication
Gear Ratio (Primary)
2.08:1
Gear Shifter
F-N-R
Electric
Alternator
Alternator (Electric Start): 10 amp / 126 watts
Performance
Propulsion System
Propeller: 3-blade (Aluminum)
Fuel System
Fuel Type
Delivery: 3 Carburetors | Recommended: Unleaded Gas. (Min. Pump Octane 86)
Dimensions
Dimensions
Diameter x Pitch: 9-1/4 in. (235 mm) x 12 in. (305 mm)
Overall Width
14.8 in. (375 mm)
Transom Height
17.0 in. (431 mm)
Capacities
Oil Capacity (w/filter)
1.80 Imp. qt (1.70 L)
Weights
Dry Weight
180 lb. (81.5 kg)
Features
Features
Trim Range: -4° to +12° | Tilt Range: -4° to 64° | Recommended Oil: SAE 5W30 API service classification SJ or later | Gas Assisted Tilt | Oil Pressure Alert: Standard | Over Rev-Limiter: Standard | Temperature Alert : Standard |